Outdoor Tiles & 20mm Pavers
Outdoor tiles built for WA sun, salt and rain. 27 ranges, slip-rated and frost-proof. External-finish porcelain for alfrescos, patios, pool surrounds and paths, including 20mm pavers you can lay on sand, grass or pedestals. Available from Jupps showrooms in Geraldton, Karratha, Port Hedland and Exmouth.
- R10 and R11 slip-rated finishes
- Indoor to outdoor matching ranges
- 20mm pavers for sand and pedestal laying
- Fade and salt resistant porcelain
Find Your Outdoor Tile
Filter by colour, look, slip rating and size ↓
Browse Outdoor Tiles
About outdoor tiles
Outdoor porcelain does two jobs a natural stone paver cannot: it does not fade in the Pilbara sun or stain from salt, leaves and red dust, and it comes in an external finish with a tested slip rating, so a wet pool surround stays safe. Every range on this page carries an R10 or R11 external option, and most match an indoor tile from the same collection so the floor can run from the kitchen out to the alfresco without a step change in colour.
The looks run from natural stone (Cotto d’Este Limestone, Kronos Nativa, Cerdomus Pietra di Trani) through concrete and terrazzo (Panaria Context, Portobello Lombarda) to timber-look decking planks (MaxGlory Entice) and stacked-stone cladding for feature walls (Keradom Rilieve). The 20mm pavers, such as Limestone, are thick enough to lay directly on compacted sand, grass or pedestals without glue.
Bring the alfresco dimensions and a photo of the house colours into a Jupps tile showroom, or send them through and we will quote supply, or supply and lay, across the Mid West and Pilbara.
Why porcelain outdoors?
- Slip ratedR10 and R11 external finishes tested for wet feet.
- Will not fadeFired colour that shrugs off UV, salt and red dust.
- Inside to outsideMatching indoor and outdoor finishes in one range.
- 20mm paversLay on sand, grass or pedestals, no glue needed.
- Easy to cleanA hose and a broom; no sealing, ever.
Popular outdoor ranges
Cotto d’Este Limestone 20mm
A limestone-look 20mm paver in Clay, Oyster, Slate and Amber, with P4/R11 finishes for pool surrounds and pedestal decks.
Kronos Nativa
Layered quartzite looks in four colours with matching slabs, mosaics and external finishes for a seamless indoor-outdoor floor.
MaxGlory Entice
Plank-format timber look in Washed Oak, Nordic Drift, Wheatwood and Amber for decks and alfresco floors.
Keradom Rilieve Stack Stone
Interlocking stacked-stone cladding in Ambra and Perla for outdoor feature walls and pillars.
All outdoor tile ranges
- Cerdomus Pietra di Trani – a classic Italian stone look with an R11 finish in mixed sizes
- Keradom Vulcani Stack Stone – volcanic stone cladding in Avorio
- Bellissimo Deep Stone – R11 stone look in White and Light Grey
- MaxGlory Pietra – value stone look in Grey and White
- MaxGlory Mystic Marmo – matt marble look for covered alfrescos
- Rondine Stauton 3D – textured 150×610 wall planks in Graphite and Putty
- Portobello MS Barcelona – concrete look in Cristal and Anthracite up to 600×1200
- Xclusive Mystique – patterned 205×205 feature tile, P3/R10
- Portobello Deep Forest – 145×145 green glazed tile for pools and feature walls
- APE Pierre de Bali – 150×150 Bali stone look for pools, P3/R10
- APE Deep Blue Oxid – 150×150 pool blue, P3/R10
- APE Hijau Green – 150×150 pool green, P3/R10
- Panaria Context – concrete-terrazzo hybrid with R10 external finish
- Portobello Lombarda – terrazzo look with an external 600×600
- Fioranese I Ciottoli – pebble terrazzo with external finish
- DelConca Frammenti – small-format terrazzo for outdoor feature areas
- Cerdomus Neoclassica – R11 terrazzo look
- Rondine Crust – a rugged stone look
- Cotto d’Este Geos Radical Stone – large-format stone look
- Summer – an outdoor range
- Provenza W-Circles – pool and wet-area mosaic
- MaxGlory Magma – eight-colour pool and outdoor porcelain
- Jadidi Mosaic GP – glass pool mosaics in four colours
Frequently asked questions
What is the difference between a 20mm paver and a normal outdoor tile?
A 20mm paver is twice the thickness of a standard 9 to 10mm tile, so it can be laid loose on compacted sand, grass, gravel or pedestals with no adhesive. Standard external tiles are glued to a concrete slab. Both are the same porcelain and carry the same slip ratings.
Which slip rating do I need for a pool surround?
Look for P4 or R11 for any surface that is regularly wet and walked on barefoot. P3 or R10 is fine for covered alfrescos and dry patios.
Will outdoor porcelain fade in the Pilbara sun?
No. The colour is fired into the tile, so it does not fade, stain or need sealing. That is the main reason we recommend porcelain over natural stone in Karratha, Port Hedland and Exmouth.
Can I run the same tile from inside to the alfresco?
Yes. Most ranges on this page have a matching indoor finish in the same colour, so the floor reads as one surface with only the finish changing at the door.
Where can I see outdoor tiles in WA?
Jupps sells tiles from its Geraldton, Karratha, Port Hedland and Exmouth showrooms. Samples are ordered in from Perth for you to take home.
Tiles at Jupps
Tiles are stocked and ordered through our Geraldton, Karratha, Port Hedland and Exmouth showrooms. Samples can be ordered in for you to take home. Samples to take home
Find your nearest tile showroom